Viper Night Drivin' Rubber Kits



Sega Pinball, Incorporated , 1998
6 Players

(0)

Glow ring kit with proper 3/16 count, no 5/16 rings are used on this game.

Submitted by: Anonymous Anonymous
Submitted on: 2016-04-18 18:27:52 2016-04-18 18:27:52
View Full Kit

This kit doesn't have any photos.
Post Sleeves - Standard
Glow
Qty: 5
Rubber Rings - Flipper Standard
Glow
Qty: 2
Rubber Rings - 2 1/2 Inch I.D.
Glow
Qty: 4
Rubber Rings - 1 1/4 Inch I.D.
Glow
Qty: 1
Rubber Rings - 3/4 Inch I.D.
Glow
Qty: 4
Rubber Rings - 3/16 Inch I.D.
Glow
Qty: 7
Rubber Rings - 3/8 Inch O.D.
Glow
Qty: 6
(0)

Full glow kit w/pics. I have 3 Vipers that are all missing one of the posts under the right metal ramp near the pops (see pic). The manual calls for 2 rubbers, I used 1 2" rubber instead, works fine. Only 3 3/8"OD are on the playfield, I used 8 total. Adjust your numbers to what you prefer. Note: The pin pictured had the T8s replaced with UV LED fixtures. The numbers in this kit match what is needed for a stock Viper.

Submitted by: Derrick W. Derrick W.
Submitted on: 2020-12-07 13:14:00 2020-12-07 13:14:00
View Full Kit

Rubber Rings - Flipper Standard
Glow
Qty: 2
Post Sleeves - Standard
Glow
Qty: 5
Rubber Rings - 2 1/2 Inch I.D.
Glow
Qty: 4
Rubber Rings - 2 Inch I.D.
Glow
Qty: 1
Rubber Rings - 1 1/2 Inch I.D.
Glow
Qty: 2
Rubber Rings - 3/4 Inch I.D.
Glow
Qty: 2
Rubber Rings - 3/16 Inch I.D.
Glow
Qty: 7
Rubber Rings - 3/8 Inch O.D.
Glow
Qty: 3
Rubber Rings - 3/8 Inch O.D.
Glow
Qty: 5

Powered By Awesome Pinball Players Like You!
Made with love by 86Pixels
Titan Pinball © 2021