Verified

(0)

Custom Titan Pinball glow kit for ACNC. This kit has the following changes: substitite 4) 3/8" ID for the 4) 5/16" ID substitite 2) 2-3/4" slingshots instead of 2-1/2" Use a purple low-bounce standard flipper instead of mini flipper

Submitted by: Titan . Titan .

Submitted on: 2019-04-23 09:43:36 2019-04-23 09:43:36

(0)

All glow with the exception of the flipper on the upper playfield, which is purple. Glow just doesn't contrast well with the silver flipper.

Submitted by: Anonymous Anonymous

Submitted on: 2019-10-21 08:46:45 2019-10-21 08:46:45

(0)

All purple, with the exception of the main flippers, which are black.

Submitted by: Anonymous Anonymous

Submitted on: 2019-10-21 08:50:47 2019-10-21 08:50:47

(2)

Full rubber swap for Alice Cooper's Nightmare Castle, using Glow In The Dark rubbers. On my game, the 5 post sleeves on the lower play field and the 2" ring on the left side of the lower playfield got the highest amount of wear. Those 6 rubbers were practically worn through, while all the others were basically brand new (minus some discolouration from the ball). If you're looking for minimum replacement, that is it. I used purple low-bounce flippers, but obviously you can swap these out for standard. You may also swap the 2-1/2" rubbers (slings) for 2-1/4" if you prefer the sling rubbers to be tighter. Last and least, there are 2x 1/2" rubber sleeves/spacers underneath the middle rubber rings on the lower playfield. These don't really get any wear, but if you want extra colour for some reason, you can get 2x of the 1/2" Data East Post Sleeve rubbers for these. Note: This game does not use a shooter tip.

Submitted by: Gabriel K. Gabriel K.

Submitted on: 2020-07-05 00:35:13 2020-07-05 00:35:13

(1)

Additional flipper options and colors to try

Submitted by: Anonymous Anonymous

Submitted on: 2021-03-04 10:59:14 2021-03-04 10:59:14

(0)

.

Submitted by: Anonymous Anonymous

Submitted on: 2022-07-12 03:14:11 2022-07-12 03:14:11