(0)

All clear rubbers, Green flipper rubbers, with 1 extra rubber per size

Submitted by: Daniel C. Daniel C.

Submitted on: 2021-10-04 09:45:34 2021-10-04 09:45:34

(0)

Flip-On

Submitted by: Anonymous Anonymous

Submitted on: 2021-10-04 10:47:22 2021-10-04 10:47:22

(0)

This is a double kit for Godzilla Pro by Stern 2021. It has extras of every single rubber and includes both green and grey flipper rubbers for the Godzilla and Mecha-Godzilla color matching your preference. The shooter tip is also green and grey, and all other rubbers are clear. With this kit, you should be able to get your entire game converted to titans, and have a complete spare set in case of any future breaks! I always like to keep a spare set of rubbers in the cabinet of the game just for these emergencies. Saves me time and shipping costs down the road and this way I am prepared for everything!

Submitted by: Anonymous Anonymous

Submitted on: 2021-10-08 10:00:28 2021-10-08 10:00:28

(1)

Complete rubber kit per the Stern manual, PLUS 1 extra ring of each size to have as a spare.

Submitted by: phillip h. phillip h.

Submitted on: 2021-10-14 07:51:06 2021-10-14 07:51:06

(0)

Clear kit with green flippers and black post sleeves.

Submitted by: Anonymous Anonymous

Submitted on: 2021-11-11 19:52:53 2021-11-11 19:52:53

(0)

Complete rubber kit per Stern manual. No extras. Light blue post sleeves match the playfield better than red imho. You could also do 3 red post sleeves on the left, and 3 blue post sleeves on the right, which would match very well. Blue versus light blue would also work. I’ve attached a full playfield image of the game so you can see playfield colors and make your own choice. I like my post sleeve to blend in with there surroundings. I think green or red flipper rubbers would look good. Red matches more closely to the surrounding colors and plastics near all 3 flippers. Since I’m installing green scale flipper topper decals, I’m going to go with red flipper rubbers. Happy Flippin’!

Submitted by: James B. James B.

Submitted on: 2021-11-26 21:53:04 2021-11-26 21:53:04

(0)

Godzilla Pro (Orange, Lt Blue, Clear) +1 spare (per Stern specs) NOTE: Stern specs says rubber id #2 as 7/16; it should be 3/8 Rubber id #1, #2 and one #5 (upper right playfield) do not get hit so they may get skiiped

Submitted by: Anonymous Anonymous

Submitted on: 2022-01-12 09:01:09 2022-01-12 09:01:09

(0)

Add-on Kit Multi Colors (not full kit per Stern specs)

Submitted by: Anonymous Anonymous

Submitted on: 2022-01-14 05:28:51 2022-01-14 05:28:51

(0)

GITD - Glow in the Dark kit, per the MANUAL for Godzilla Pro No extra rubbers, all GITD. You can customize upon adding it to cart.

Submitted by: Glen B. Glen B.

Submitted on: 2022-02-05 13:53:56 2022-02-05 13:53:56

(0)

Keep it original. All black rings and posts. All rings and post sizes have been verified by the Pro Godzilla manual. Includes 1 extra sling shot rubber ring and 1 extra flipper rubber.

Submitted by: Anonymous Anonymous

Submitted on: 2022-02-21 17:17:10 2022-02-21 17:17:10

(1)

Godzilla Pro Kit - ONLY THE STUFF YOU ACTUALLY NEED - Verified on the game. Ignore those kits 'made from the manual' or trying to sell you more. The manual always has errors (including GZ). This kit is the rubber in stock black and excludes 1) the bumpers that titan doesn't sell 2) pads for mechanisms you don't replace unless rebuilding a machine (and titan doesn't sell) and 3) ball trap rubbers that don't need expensive silicon because the ball never touches them. If you want the extra ball trap rubbers, add Qty 1 - 7/16" OD Black (goes next to Mechzilla plastic) Qty 2 - 3/8" ID black rings. (Go on the starposts next to the right ramp and behind the plastic over the city saucer) Can also use 5/16" ID No fancy pictures this time because this is a stock build and Godzilla rubber is pain simple. Updated rubber chart shown

Submitted by: steve k. steve k.

Submitted on: 2022-02-24 22:15:34 2022-02-24 22:15:34

(0)

Scott's Pro Kit

Submitted by: Anonymous Anonymous

Submitted on: 2022-04-12 10:22:46 2022-04-12 10:22:46

(0)

Translucent with red flipper kit for Godzilla Pro - I'm Elysiom on Pinside.

Submitted by: Anonymous Anonymous

Submitted on: 2022-10-05 16:13:44 2022-10-05 16:13:44

(0)

GITD

Submitted by: Anonymous Anonymous

Submitted on: 2022-10-22 03:26:56 2022-10-22 03:26:56

(0)

All Lt. Blue with Low Bounce flipper rubbers. Per the manual with one extra of each.

Submitted by: Sam T. Sam T.

Submitted on: 2022-11-28 01:31:35 2022-11-28 01:31:35

(0)

I used Green for Flippers, shooter tip and post sleeves. Purples for the slings and translucent for the rings.

Submitted by: Kyle R. Kyle R.

Submitted on: 2022-12-10 16:16:38 2022-12-10 16:16:38

(0)

Double everything. Green low bounce flipper rubbers, black post sleeves. No frills, lots of extra to save time and shipping.

Submitted by: Anonymous Anonymous

Submitted on: 2023-01-29 12:45:00 2023-01-29 12:45:00

(0)

Low bounce Glow

Submitted by: Anonymous Anonymous

Submitted on: 2023-02-08 11:15:28 2023-02-08 11:15:28

(0)

Show kit in all Green. Fits Pro and Premium/LE

Submitted by: Titan . Titan .

Submitted on: 2023-05-19 12:48:53 2023-05-19 12:48:53

(0)

Show kit in all Glow. Fits Pro and Premium/LE

Submitted by: Titan . Titan .

Submitted on: 2023-05-19 12:50:51 2023-05-19 12:50:51

(0)

Translucent with green low bounce flippers

Submitted by: Anonymous Anonymous

Submitted on: 2023-07-11 20:56:56 2023-07-11 20:56:56

(0)

Godzilla pro Green

Submitted by: Anonymous Anonymous

Submitted on: 2023-10-04 10:39:09 2023-10-04 10:39:09

(0)

Black

Submitted by: Anonymous Anonymous

Submitted on: 2023-12-10 20:20:17 2023-12-10 20:20:17