Titan Pinball Kits Database

White Water
Rubber Ring Kit by Matthew d.

(0)

Williams Electronics Games, Incorporated, a subsidiary of WMS Ind., Incorporated , January, 1993

4 Players , 3 Balls

Manual Page Ring Diagram

Description

Give your WH2O new life and a splash of color!

Totally complete kit for White Water, so please customize for your needs and remove what you don't need.  Notes and details are below:
- 3/16" ID ring (#23-6641) x1 (slim plastic post, top of Jet Arena)
- 5/16" ID ring (#23-6300) x5 (1 is optional) (plastic starred posts (optional one is on arch/apron))
- 3/4" ID ring (#23-6301) x1 (inner, left side of Boulder Garden)
- 1" ID ring (#23-6302) x1 (outer, left side of Boulder Garden)
- 1-1/4" ID ring (#23-6303) x1 (optional, not pictured) (replaced by 3/16" ID ring (#23-6641) x1) (seals an exit from Boulder Garden, seldom used)
- 1-1/2" ID ring (#23-6304) x2 (right of Jet Arena)
- 2" ID ring (#23-6305) x1 (Upper Playfield)
- 2-1/4" ID ring x2 (or use 2-1/2" ID ring (#23-6306)) (Slingshots) (2" ID stock is too small for good durability)
- Standard Post / 1-16" tall (7/16" OD) (#23-6556) x12 (2 are optional for shooter gauge starred posts (cut 1/4" away, to protect light shield))
- Bumper / 7/16" OD (#23-6535) x7 (4 optional) (optional 4 are for Vertical Up Kicker wire form ramp to prevent backspin, cut once and slide on the end that exits to the upper playfield)
- Flipper Ring 1-1/2" ID (#23-6695) x3 (2 main playfield, 1 mini playfield)
- Shooter Tip (#23-6327) x1
- Post Cap x2 (optional, not pictured, for both ends of the apron / arch to protect the decals)

Using translucent blue and translucent white rings, with some orange for bumper posts to blend in with the boulders/mountains. 2-1/4” ID (or 2-1/2" ID) rings for the slingshots / slings (instead of 2" ID) for better durability, and no ring for partially closing off the Jet Arena to the right lanes, as this isn't typically found in games and doesn't actually decrease ball drains.  Translucent blue flippers (standard) and shooter tip.  Translucent blue rings go on the lower region of the playfield, by RIVER and the Jet Arena.  Translucent white rings go on the lower region of the playfield to the left of the Boulder Garden and on the upper playfield.  Areas are color matched for perfection!

Note: If using the 3/16" ID ring and not using the 1-1/2" ring, it might mean you have an extra starred post in your Boulder Garden.  You can leave the starred post in place if you want, but then add one more 5/16" ID ring to the order (x6 5/16" ID rings, total)

‹ ›

Kit Contents Print

Rubber Size/Type

Color

Quantity

Rubber Rings - 3/16 Inch I.D.

Translucent Blue

Qty: 1

Rubber Rings - 5/16 Inch I.D.

Translucent Blue

Qty: 2

Rubber Rings - 5/16 Inch I.D.

Translucent

Qty: 3

Rubber Rings - 3/4 Inch I.D.

Translucent

Qty: 1

Rubber Rings - 1 Inch I.D.

Translucent

Qty: 1

Rubber Rings - 1 1/2 Inch I.D.

Translucent Blue

Qty: 2

Rubber Rings - 2 Inch I.D.

Translucent

Qty: 1

Rubber Rings - 2 1/4 Inch I.D.

Translucent Blue

Qty: 2

Post Sleeves - Standard

Translucent Blue

Qty: 3

Post Sleeves - Standard

Orange

Qty: 7

Post Sleeves - Standard

Translucent

Qty: 2

Rubber Rings - 7/16 Inch O.D.

Translucent Blue

Qty: 5

Rubber Rings - 7/16 Inch O.D.

Orange

Qty: 2

Rubber Rings - Flipper Standard

Translucent Blue

Qty: 3

Rubber Rings - Shooter Tip

Translucent Blue

Qty: 1

Misc - Post Cap

Translucent Blue

Qty: 2

Comments

2024-12-04 09:20:28 Matthew d. wrote:

Manual with some incorrect ring info, to reference if needed: https://www.ipdb.org/files/2768/Williams_1993_White_Water_English_Manual.pdf

2024-12-04 09:22:06 Matthew d. wrote:

(page 106/154)

White Water Rubber Ring Kit by Matthew d.

Kit Contents Print

Comments

Powered By Awesome Pinball Players Like You! Made with love by 86Pixels Titan Pinball © 2024

White Water
Rubber Ring Kit by Matthew d.

Powered By Awesome Pinball Players Like You!
Made with love by 86Pixels
Titan Pinball © 2024